The “tuxphone” - a DYI Open Source GSM phone

“TuxPhone is a project to develop open source (hardware and software) GSM/GPRS cellphone. Our objective is to create an open (in every sense of the word) cellphone platform that is convenient for creating novel applications. For instance, someone could take this reference design and integrate it with a small RFID reader to create a RFID enabled cellphone. Or, for that matter someone come up with a software that finds the cheapest way to make a phone call based on the available connectivity - VOIP or GSM.”

If you’re up to the challenge, I think there is enough information available now to create your very own tuxphone. You’re definately not going to save any cash, and the design is likely to look, well, a bit unpolished … but the idea of an open phone platform is an interesting one for the hobbyist, or those looking to experiment with new ideas for mobile.

Interested? Some links to check out:

opencellphone.org

dseetharam-etel-2006.ppt

silicon-valley-homebrew-mobile-phone-club

tuxphone sourceforge.net

FAQ

Installing MIDlets on Series 40 and S60

The MIDP specification allows quite a lot of variance in the installation procedure of MIDlets. The spec basically only states what the AMS (Application Management System) needs to take care of but not how it should be taken care of. So it is no wonder that installing MIDlets on Series 40 is different from installation on S60 phones.

First of all, when you transfer MIDlets to Series 40 phones, they will get installed "on the background". The user does not need to start the installation procedure and walk through the installation - after the user navigates to the Application menu, the MIDlets is already there. On S60 phones the user has click through an installation before the MIDlet is installed on the phone. If the MIDlet was downloaded using the browser that process starts automatically. In other cases the user has to go to inbox and start the installation by clicking the JAR or JAD file. On Series 60 phones the destination of the MIDlet varies across the board. On some devices the MIDlets are installed in "My Own" folder, or in "Installations", or...

On Series 40 phones the destination of the MIDlets has changed a little through the different models, but mainly the MIDlets can be found in the "Games" subfolder.

One might ask how Series 40 phone user knows which of his/her MIDlets are untrusted and which are signed as no installation notifications are displayed to the user. The answer is that the user has to select the MIDlet in question and check the MIDlet settings using the Options menu.

One thing to remember on Series 40 phones is that when upgrading a MIDlet, JAD files need to be used. If one intends to upgrade an existing MIDlet using JAR file only, the MIDlet does not get replaced but the new MIDlet gets installed next to he old existing version.

more information read this

BREW: How to use callbacks while working with BREW in C++

Simplest Way:
Make the callback Function member as static then this function will be treated as Global function.
But you have to pass the this pointer to access class members. So not so good.

Best way:
The Below Example will explain the procedure.
class CTimer
{
void startTimer();
void doTimer();
};

int (* PFNCALLBACK)(void *);
int(CTimer::*PFNMEMBERCALLBACK)();

PFNCALLBACK functionCast( PFNMEMBERCALLBACK pMemberCallback)
{
union
{
PFNCALLBACK m_callback;
PFNMEMBERCALLBACK m_member;
} a;

a.m_member = pMemberCallback;
return a.m_callback;
}

void CTimer::startTimer()
{
ISHELL_SetTimer( pIShell, timeInterval, functionCast(&CTimer::doTImer), NULL);
}
So what you say.

Battle Of Mobile OS
Symbian is a very good OS and has a strong growing market sponsored by many device makers, but Windows Mobile is also a very good platform. Since mobile devices hardware has evolved a lot in the last years, chances are a new OS battle will happen soon.

You can read an in-depth article regarding this issue here: http://mobileopportunity.blogspot.com/2006/11/symbian-unloads-uiq-and-mobile-apps_09.html. And don't stop at the end of the article, but go on for the comments, too. It's definitely worth it.

Symbian Security Video Podcast Available

There's a new video podcast available discussing Symbian platform security and the actions needed to get an application to market. It's presented by Risto Helin, Manager of Application Testing for Forum Nokia. The webinar covers different capability needs and Symbian Signed process, and presents for technical audience the platform security and its impact on application development.

Sun Open Sources Java ME under GPL

Sun Microsystems, Inc, the creator of Java technology today (Nov, 13) announced it is releasing its implementations of Java technology as free software under the GNU General Public License version two (GPLv2). Available today are a buildable implementation of Java ME (formerly J2ME) and the first pieces of source code for Java SE.

Available in the Java.net community is the source code for Sun's feature phone Java ME implementation with the Java ME testing and compatibility kit framework. Before the end of the year, Sun will release additional source code including its advanced operation system phone implementation and the framework for the Java Device Test Suite. Sun is also releasing as free software the javac compiler, JavaHelp and Java HotSpot technology, the heart of JVM and JRE for desktops.

In addition, an application developer project is available as part of the Mobile & Embedded community, with links to resources such as the NetBeans Mobility Pack.

Rich Green, execute vice president of Software at Sun said "By open sourcing Sun's implementation of Java technology, we will inspire a new phase of developer collaboration and innovation using the NetBeans IDE and expect the Java platform to be the foundation infrastructure for next generation Internet, desktop, mobile and enterprise applications".

Common Types of Flash Lite Applications.

1- Browser: This is the flash plug in for general websites.
2- Wallpaper: No description needed.
3- Screen saver: No description needed.
4- Standby: Same as Wallpaper and Screen saver.
5- UI: User Interface. To Other Non Flash Lite Applications.
6- MMS: MMS Sending Application.
7- Stand-alone application: Stand alone softwares and games.

Crash Course on "ARM and Thumb"

You might want to get a few books, these three are very, very, very good: http://www.keil.com/books/armbooks.asp and read for some time, but meantime here is a crash course:

There are two (2) states of ARM processors: ARM and Thumb.
There are seven (7) modes: usr, sys, svc, abt, fiq, irq and und.
The modes can be privileged and non-privileged (usr).
Privileged modes can modify CPSR_c (least sig. byte) of CPSR, usr mode cannot do that.
Why? Safety/security reasons. The bits in CPS_c control the interrupts and mode/state switching.

Most (or some) people get sloppy with saying modes and meaning states
and vice versa. But as Alice in Wonderland was instructed by March Hare and Hatter:
"...at least I mean what I say - that's the same thing, you know." "Not the same thing a bit!" said the Hatter. "Why, you might just as well say that 'I see what I eat' is the same thing as 'I eat what I see'!"

I hope this helps you to see my point, it is not for the sake of appearing pedantic.

* __arm or__thumb does not metter to compiler.
That is because IAR had made it [more] transparent to programmer to compile for either ISA (Instruction Set Architecture).

Thumb gives less code then ARM.BINGO!
That is the whole idea behind Thumb. This ISA is 16-bit, whereas ARM is 32-bit. Not all instructions from ARM map in one-to-one fashion to Thumb. ARM instruction can be executed conditionally, Thumb instruction cannot, just piggyback the one-of-16 conditions after the mnemonic. Back to the code size saving, it will not be 2:1 ratio, either. It depends on the the program.

Symbian OS Unit

No matter how much time you invest into your application design, and how careful you are during program code writing – mistakes are inevitable. Without automated testing it is complicated and time consuming to ensure that changes will not break the existing code.

There are tools for Java and C++ which make it possible for programmers to execute simple testing on the stage of code writing and ensure the smooth integration of new features. But what about tools for other platforms? What about Symbian and BREW.

Symbian OS Unit is a port of the popular C++ unit testing framework CxxUnit. It provides a powerful and flexible testing framework whilst requiring the minimum of developer effort to produce a library of tests. It can be used with any of the available Symbian development environments and can currently be built for the UIQ and Series 60 reference platforms.

Symbian OS Unit is open source under the GNU Lesser General Public License. See the current status on the project's Sourceforge page for more information or to download the tool. Access the source via WebCVS.

Symbian OS Unit was developed and is supported by Penrillian.

To Read more you can go to it's site. http://www.symbianosunit.co.uk/

Symbian S60 Code Tips
Hide application from the tasks list

void CSomeDocument::UpdateTaskNameL(CApaWindowGroupName* aWgName)
{
// Set app task name hidden in the task list
aWgName->SetHidden(ETrue);
}

Sony Ericsson to Acquire UIQ

Sony Ericsson today announced it has reached agreement in principle for acquiring the Swedish software company UIQ Technology AB, a wholly-owned subsidiary of Symbian Ltd. UIQ Technology, which uses Symbian OS™, licenses the UIQ user interface and application development platform to mobile phone vendors worldwide.

Sony Ericsson is already a licensee of UIQ Technology, and has been working closely with the company on UIQ version 3.0, which is included in Sony Ericsson’s P990 smartphone, M600 messaging phone and W950 Walkman® phone.

"UIQ offers excellent technical flexibility enabling us to provide compelling features such as push email, internet browsing, end user personalization, and enhanced music applications" explains Mats Lindoff, Chief Technology Officer at Sony Ericsson. "By acquiring UIQ Technology we will further invest and exploit the full potential of UIQ on Symbian OS for phone vendors, mobile operators, developers and consumers."

Following completion of the acquisition, UIQ Technology will operate as a separate business subsidiary of Sony Ericsson under its current management team. UIQ on Symbian OS will continue to be openly available, licensed on equal terms to all its licensees.

To read the full story go to this link

Drive Letter in S60 Phones

Drive Letter in S60 Phones

I know that some of the advanced users have already know the meaning of C:, D:, E: and Z: drives in S60 phones. However, I just recap it here because I have seen some questions floating around in some forum discussions.

If you are using built-in file manager from S60, it allows you to browse phone memory and memory card only. However, if you download third party file managers, such as SysExplorer or Y-Browser, it allows you to browse all drives in the file system. Look at the screenshot below.

• C:\. This drive is also called phone memory. Basically it is a flash memory where we can install applications and store our data. Unlike memory card, it is always inside our phone. So, even if we remove the memory card, our data are still there. However, note that the size of phone memory is limited.
• D:\. It is the drive used to store temporary files. The contents will be deleted when the device reboots. In many cases, we don’t use this drive.
• E:\. It is the drive of your memory card. Normally, this is the place where we install applications and install our data.
• Z:\. This is where the ROM image is stored. It contains all the operating system’s applications and data files. Since it is read-only memory, you cannot write anything. The only way to modify the contents of Z:\ drive is by flashing the phone, for example via Nokia Software Updater.

Symbian Platform Identification Codes

Devices based on the S60 platform have a built-in mechanism to warn users attempting to install incompatible software — either a non-S60-based application or an S60-based application targeted at a newer platform release than the release of the device into which the application is being installed. Incompatibility can also be an issue when S60-based applications that are built only for a particular S60 device model are being installed on a different S60 device model. An example of an application that is incompatible with a device model is a camera application that is being installed into a device that does not have a camera.

All installation packages of S60 applications should contain the id-sequence in order to facilitate smooth installation of the software. If the id-sequence is not found or the id-sequence is not recognized by a device (for example, the id-sequence refers to a newer platform release than the release supported by the device), the user will get a notification about the potential incompatibility. Depending on the platform release, the installation process can be continued, but at the risk of application functionality failure.

To avoid the above failures the identification code is specified as a requisite in the installation package file (.pkg).

For 3.x and above.
#{"MyApplication"},(0x20000001),1,0,0
[0x101F7961], 0, 0, 0, {"Series60ProductID"}

For 1.x and 2.x
#{"MyApplication"},(0x10000001),1,0,0
; Platform ID for S60 2nd Edition
(0x101F7960), 0, 0, 0, {" Series60ProductID"}

For more Information you can refer to http://forum.nokia.com

Symbian Signed means less choice

They say "Symbian Signed is designed to keep troublemakers out. Both intentional troublemakers such as virus writers and unintentional troublemakers such as software with critical bugs. The idea is to have an outside third party company doing the testing in order to have the same rules and tests for everyone".

To me, this sounds too good to be true. Unrealistic.

In my opinion the reality is that Symbian Signed keeps many developers out! Less software for Symbian phones, less choice...

BREW 2007 DEVELOPER AWARDS CALL

BREW publishers and developers are invited to submit their top BREW applications for consideration by completing an online entry form and providing a demo of their application. Finalists will be announced on the BREW 2007 Web site on May 21 and winners will be revealed at the awards ceremony hosted during the BREW 2007 Conference.

For reading full Story www.brew2007.com

Vista gets official release dates

Thanks crahak for posting this in BPTN. Microsoft has set November 30 as the release date for Vista (and Office 2007) to business customers and January 30, 2007 as the date for the official launch to consumers and The World At Large. Five years, three months and five days after Windows XP made its debut, Microsoft will usher its next-generation OS onto the stage.
APC has been advised by a very well placed source that January 30, 2007 is about to be announced as the official release date for Vista.

In addition, in a move that mirrors previous side-by-side launches of Microsoft's OS and Office suite (in the 95 and XP waves), Office 2007 will also touch down on that day. However, as previously planned, Vista and Office 2007 will first step out for a 'business launch' on November 30 (alongside Exchange 2007). From that date, the programs will be available to corporate customers who hold an enterprise licence or software assurance deal with Microsoft.

Read FullSory http://apcmag.com/node/4258

Internet Explorer 7 Final

Internet Explorer 7 is a major step forward in ease of use and security. Explore the tabs to learn more.

Upgrade with Confidence — check out Internet Explorer 7 and install it today.

Do you Love FireFox and believe what they all clam about FireFox. Then read this

http://mywebpages.comcast.net/SupportCD/FirefoxMyths.html

Hello Friends,
Today we will discuss about "Command Line Arguments in Symbian".

If you have done some desktop programming, you understand that in main () function arguments we can get the command line passed to the program. If you ever thought how arguments passed to Symbian EXEs are handled. (How to pass arguments to Symbian EXE? to this i will post another post till then be pasence.)

As all Symbian programmers know that E32Main () function does to supply arguments, So how to handle the arguments or access the passed arguments.

The Trick is we have to use a API called "CCommandLineArguments"
Location: bacline.h
Link against: bafl.lib
Reference: C++ API reference » Command Line Parsing » CCommandLineArguments
Example:
void ReadAndWriteArgsL()
{
Console* console=Console::NewL(_L("Command-line arguments reader test"),
TSize(KConsFullScreen, KConsFullScreen));
CleanupStack::PushL( console );

//Create CommandLine Arguments and read it.
CCommandLineArguments* args=CCommandLineArguments::NewLC();
for (TInt i=0; iCount(); i++)
{
TPtrC argumentPrt(args->Arg(i));
console->Printf(_L("Arg %d == %S\n"), i, &argumentPrt);
}

CleanupStack::PopAndDestroy(2);
}

So what you say. Isn't it a small trick?
Coming up
========
* I will Post some more posts Symbian APIs.

Do write comments about this post or write to me at [skumar.brewdev@yahoo.com]

Thanks.
Sunil Kumar

Hello Friends,
Today we will discuss about "BREW: Cryptic Emulator Messages".

Have you seen any messages as below in your Output windows when the emulator/ simulator for brew is running.

*OEMOS.c:556 - BPOINT Type 3, Address: 0x01D98590
*OEMOS.c:539 - BPOINT Type 1, Node 0x01D94554

Do you wondered what these BPOINT means ?

BPOINT are Sort form of "BREAK POINTS" and the types of these BPOINTs really give you a lot of information as given bellow.

BPOINT Type 1 : Memory leak in the app due to user allocated memory using MALLOC "Node" is just a naming convention.

BPOINT Type 2 : Memory leak in the app due to BREW Interface memory leaks. In this case, "IFace" would have been printed out instead of "Node".

BPOINT Type 3 : Memory being double freed. Exception!

BPOINT Type 4 : Memory Corrupted. Corrupt Node


Coming up
========
* I will Post some more tricks about Debugging in BREW.

Do write comments about this post or write to me at [skumar.brewdev@yahoo.com]

Thanks.
Sunil Kumar

Hello Friends,
Today we will discuss about "Symbian OS Error Codes".

It is Impossible to think any development process with out a Error (Panic). Did you bothered at any time what this error code mean. Of course you did, any try to find out the information about that code in SDK I think most of you most of the times did not find the meaning.

So I list most of the Error Codes that I can find. (You can see a long list. ay not be well formated)

Generic Errors
KErrNone 0
KErrNotFound -1 Unable to find the specified object
KErrGeneral -2 General (unspecified) error
KErrCancel -3 The operation was cancelled
KErrNoMemory -4 Not enough memory
KErrNotSupported -5 The operation requested is not supported
KErrArgument -6 Bad request
KErrTotalLossOfPrecision -7 Total loss of precision
KErrBadHandle -8 Bad object
KErrOverflow -9 Overflow
KErrUnderflow -10 Underflow
KErrAlreadyExists -11 Already exists
KErrPathNotFound -12 Unable to find the specified folder
KErrDied -13 Closed
KErrInUse -14 The specified object is currently in use by another program
KErrServerTerminated -15 Server has closed
KErrServerBusy -16 Server busy
KErrCompletion -17 Completion error
KErrNotReady -18 Not ready
KErrUnknown -19 Unknown error
KErrCorrupt -20 Corrupt
KErrAccessDenied -21 Access denied
KErrLocked -22 Locked
KErrWrite -23 Failed to write
KErrDisMounted -24 Wrong disk present
KErrEof -25 Unexpected end of file
KErrDiskFull -26 Disk full
KErrBadDriver -27 Bad device driver
KErrBadName -28 Bad name
KErrCommsLineFail -29 Comms line failed
KErrCommsFrame -30 Comms frame error
KErrCommsOverrun -31 Comms overrun error
KErrCommsParity -32 Comms parity error
KErrTimedOut -33 Timed out
KErrCouldNotConnect -34 Failed to connect
KErrCouldNotDisconnect -35 Failed to disconnect
KErrDisconnected -36 Disconnected
KErrBadLibraryEntryPoint -37 Bad library entry point
KErrBadDescriptor -38 Bad descriptor
KErrAbort -39 Interrupted
KErrTooBig -40 Too big
KErrDivideByZero -41 Divide by zero
KErrBadPower -42 Batteries too low
KErrDirFull -43 Folder full
KErrHardwareNotAvailable -44
KErrSessionClosed -45
KErrPermissionDenied -46

Email Pop Errors
KPop3CannotConnect -170 The POP3 server refused to allow a connection
KPop3InvalidUser -171 The POP3 server refused to allow a connection. Check your mailbox username
KPop3InvalidLogin -172 The POP3 server refused to allow a connection. Check your mailbox username and password
KPop3CannotCreateApopLogonString -173 Could not create secure logon string. Mailbox server may not support secure logon
KPop3ProblemWithRemotePopServer -174 Problem communicating with POP3 server
KPop3CannotOpenServiceEntry -175 Panic
KPop3CannotSetRequiredFolderContext -176 Panic
KPop3InvalidApopLogin -177 Panic
Email Socket Errors
KImsKErrorDNSNotFound -180 Could not find a DNS server. Please check the DNS address in the internet control panel
KImsKErrorControlPanelLocked -181 Could not connect to internet. Please ensure the internet control panel is closed
KImskErrorISPOrIAPRecordNotFound -182
KImskErrorActiveSettingIsDifferent -183 Unable to connect using the specified IAP, already connected to the Internet using a different IAP
KImskSecuritySettingsFailed -184
Socket Errors
KErrNetUnreach -190 Could not connect to the network. Currently unreachable
KErrHostUnreach -191 Could not connect to the specified server
KErrNoProtocolOpt -192 The specified server refuses the selected protocol
KErrUrgentData -193
KErrWouldBlock -1000 Conflicts with KErrExtended, but cannot occur in practice

EMail IMAP Errors
KErrImapConnectFail -200 Could not connect to IMAP4 server
KErrImapServerFail -201 The connection to the IMAP4 server has been broken
KErrImapServerParse -202
KErrImapServerBusy -203 The IMAP4 server refused to allow connection. The server is currently busy
KErrImapServerVersion -204 Could not connect to the IMAP server. The IMAP server is of the wrong version
KErrImapSendFail -205 Could not transmit to the IMAP4 server
KErrImapBadLogon -206 The IMAP4 server refused to allow a connection. Check your mailbox username and password
KErrImapSelectFail -207
KErrImapWrongFolder -208 Could not select an IMAP4 folder
KErrImapServerNoSecurity -209
KErrImapServerLoginDisabled -210 Login for this IMAP4 server has been disabled
KErrImapTLSNegotiateFailed -211 A secure connection cannot be made to this server
KErrImapCantDeleteFolder -212 This folder cannot be deleted
KDmssUnknownErr -221
KDmssMailboxUnavailableErr -222
KDmssActionAbortedErr -223
KDmssActionNotTakenErr -224
KDmssCmdUnrecognisedErr -225
KDmssSyntaxErrorErr -226
KDmssCmdNotImplementedErr -227
KDmssBadSequenceErr -228
KDmssParamNotImplementedErr -229
KDmssMailboxNoAccessErr -230
KDmssExceededStorageErr -231
KDmssMailboxNameErr -232
KDmssTransactionFailedErr -233
KDmssTimeOutErr -234
Email SMTP Error
KSmtpNoMailFromErr -240 Could not send email due to an invalid return email address. Check your email address in your account settings
KSmtpUnknownErr -241 Problem while sending email
KSmtpBadMailFromAddress -242 Email message has an invalid "From" address
KSmtpBadRcptToAddress -243 Email message has an invalid "To", "Cc" or "Bcc" address
KSmtpLoginRefused -244 SMTP server refused to allow connection
KSmtpNoMsgsToSendWithActiveSettings -245 Could not send email. The messages are destined for an account different from the currently connected one.
KErrSmtpTLSNegotiateFailed -246 Secure connection failed. Server may not accept secure connections or certificates may be expired.
KImcmHTMLPartNotPopulated -250
KImcmInvalidMessageStructure -251
KErrPop3TLSNegotiateFailed -260

BIO messaging
KBspInvalidMessage -500 "Corrupt message cannot be read."
KBspSmartMessageInvalidToken -501 "Corrupt message cannot be read."
KBspSmartMessageNoParserDefined -502 "Unknown message type cannot be read."
KIacpUnknownSmsType -510 "Left token not starting with neither ’M’ nor ’I’."
KIacpBIOMsgTypeNotSupported -511 "This Bio msg is not suppported.."
KiacpMandatoryDataNotSet -512 "A mandatory Field/Value has not been found in SMS message."
KIacpUnknownMailProtocol -513 "Mailbox configuration message refers to an unknown protocol."
KIacpErrRightToken -514 "Improper right token i.e not equal t/f (True/False)."
KIacpErrLeftToken -515 "Unknown Left Token i.e not starting with ’M’ for Mail or ’I’ for Internet configuration"
KIacpErrSmsDataNotParsed -516 "Sms data should be parsed before commiting."
KIacpErrSmsDataNotRestored -517 "Sms data should be parsed before commiting."
KIacpScriptErrISPNotFound -518 "Mailbox configuration message specifies an unknown Internet Access Point."
KIacpErrScriptNotDefined -519 "Script not included in sms."
KIacpErrScriptNotFoundInDB -520 "There is no script in DB to append to.."
KIacpErrScriptAlreadyAdd -521 "Script cannot be add more than ounce for a each Bio Msg."

WAP
KWappErrXmlVer -601 "Wrong XML version"
KWappErrOutbound -602 "Index in exceeds boundaries"
KWappErrStringTable -603 "Bad String table reference"
KWappErrEOS -604 "Reached the end of a key descriptor"
KWappErrUnexpectedValue -605 "Expecting a different tag or content/attributes"
KWappErrNoAttributes -606 "Expecting attributes- missing"
KWappErrMandatoryTagMissing -607 "Search for a mandatory tag failed"
KWappErrStoreNotFound -608 "No store attached to this entry"
KWappErrMsgUnparsed -609 "Trying to process a message which is unparsed"
KWappErrUnrecognised -610 "Token or string is not a recognised value"
KWappErrNullValue -611 "Variable is null or has not been intialised"
KWappErrContent -612 "Empty element, particularly a problem if it’s an empty characteristic- has no PARMS"
KWappErrNoDBRecords -613 "Could not find a first record in the COMMDB"
KWappErrNotSupported -614 "Not Supported - WAP specific"
KWappErrBadMessage -615 "Data content/format of message is invalid"
KWappErrNoTermination -616 "Terminating byte missing from string or data element."

More Wap errors can be found in the ranges -5300..-5500 and -10000..-10025. See below.

BAFL
KErrExtended -1000
KErrExtendedWithText -1001
KLeaveWithoutAlert -1002
KLeaveExit -1003
ETEL Errors
KErrEtelNotCallOwner -2000
KErrEtelDuplicatePhoneName -2001
KErrEtelAlreadyCallOwner -2002
KErrEtelNoCarrier -2003 "Problem communicating receiving device. Call was unexpectedly dropped"
KErrEtelBusyDetected -2004 "Phone number is busy. Wait before trying again"
KErrEtelNoClientInterestedInThisCall -2005
KErrEtelInitialisationFailure -2006
KErrEtelCallNotActive -2007
KErrEtelNoAnswer -2008 "Call was not answered"
KErrEtelNoDialTone -2009
KErrEtelConfigPortFailure -2010
KErrEtelFaxChunkNotCreated -2011
KErrEtelNotFaxOwner -2012
KErrEtelPortNotLoanedToClient -2013
KErrEtelWrongModemType -2014
KErrEtelUnknownModemCapability -2015
KErrEtelAnswerAlreadyOutstanding -2016
KErrEtelModemNotDetected -2017 "Phone is turned off or not ready. Check phone and try again"
KErrEtelModemSettingsCorrupt -2018
KErrEtelPortAlreadyLoaned -2019 "The Data port is in use by another call or application."
KErrEtelCallAlreadyActive -2020 "Another call active. Close it before opening a new one"

NetDial Errors
KErrExitNoModem -3001 "No response from phone. Ensure phone is switched on"
KErrExitModemError -3002 "Problem communicating with Internet service’s modem"
KErrExitLoginFail -3003 "Internet username or password is incorrect."
KErrExitScriptTimeOut -3004 "Internet service login script timed out. Internet service login script may be incorrect."
KErrExitScriptError -3005 "Problem with Internet service login script. Internet service login script may be incorrect."
KErrNetDialDatabaseDefaultUndefined -3006 "No Internet Access Points are defined"
KErrNetDialDatabaseTypeUnknown -3007 "No Internet Access Points are defined"
KErrNetDialDatabaseNotFound -3008 "No Internet Access Points are defined"
KErrNetDialHscsdNotSupported -3009

TCP/IP (v4)
KErrIfAuthenticationFailure -3050 "Internet username or password is incorrect"
KErrIfAuthNotSecure -3051 "Internet service server only allows plain text authentication. This is currently disabled.
KErrIfAccountDisabled -3052 "Could not connect to Internet service. Your account has been disabled"
KErrIfRestrictedLogonHours -3053 "Could not connect to Internet service. Your account is only active during restricted hours"
KErrIfPasswdExpired -3054 "Could not connect to Internet service. Your Internet password has expired"
KErrIfNoDialInPermission -3055 "Could not connect to Internet service. Your do not have dial-in permission"
KErrIfChangingPassword -3056
KErrIfCallbackNotAcceptable -3057 "Could not connect to Internet service. Callback is not supported"
KErrIfDNSNotFound -3058 "Could not find specified Internet server"
KErrIfLRDBadLine -3059 "Bad line to Internet service dropped"
KErrIfNoServerPresent -3060
KErrIfRemoteDisconnected -3061

More TCP/IP errors below (in the -5100 range).

GenConn
KErrGenConnDatabaseDefaultUndefined -3606 "No Internet accounts have been set up. Set up an account in Control panel."
KErrGenConnDatabaseTypeUnknown -3607 "CommDb error"
KErrGenConnDatabaseNotFound -3608 "CommDb error"
KErrGenConnNoGPRSNetwork -3609 "No Packet network available"
KErrGenConnIncorrectMSClass -3610 "Phone capabilities insufficient for required services"
KErrGenConnInadequateSignalStrengh -3611 "Signal strength too low for connection, try again later"
KErrGenConnStateMachineNotAvailable -3612 "State Machine not available for connection"

Etel GSM Errors
Radio Resource Layer (GSM 4.08)
KErrGsmRRUnspecifedAbnormalRelease -4001
KErrGsmRRChannelUnacceptable -4002
KErrGsmRRTimerExpired -4003
KErrGsmRRNoActivityOnRadioPath -4004
KErrGsmRRPreEmptiveRelease -4005
KErrGsmRRCallAlreadyCleared -4065
KErrGsmRRInvalidMessage -4095
KErrGsmRRNonExistentMessage -4097
KErrGsmRRIncompatibleMessageWithCallState -4098
KErrGsmRRInvalidInformationElement -4100
KErrGsmRRUnspecifiedProtocolError -4111

Mobility Management Layer (GSM 4.08)
KErrGsmMMUnallocatedTmsi -4129
KErrGsmMMImsiUnknownInHlr -4130
KErrGsmMMIllegalMs -4131
KErrGsmMMImsiUnknownInVlr -4132
KErrGsmMMImeiNotAccepted -4133
KErrGsmMMIllegalMe -4134
KErrGsmMMPlmnNotAllowed -4139
KErrGsmMMLocationAreaNotAllowed -4140
KErrGsmMMRoamingNotAllowedInThisLocationArea -4141
KErrGsmMMNoSuitableCellsInArea -4143
KErrGsmMMNetworkFailure -4145
KErrGsmMMMacFailure -4148
KErrGsmMMSynchFailure -4149
KErrGsmMMCongestion -4150
KErrGsmMMGsmAuthenticationUnacceptable -4151
KErrGsmMMServiceOptionNotSupported -4160
KErrGsmMMServiceOptionNotSubscribed -4161
KErrGsmMMServiceOptionTemporaryOutOfOrder -4162
KErrGsmMMCallCanNotBeIdentified -4166
KErrGsmMMSemanticErrorInMessage -4223
KErrGsmMMMandatoryInformationElementError -4224
KErrGsmMMNonExistentMessageType -4225
KErrGsmMMIncompatibleMessageWithProtocolState -4226
KErrGsmMMNonExistentInformationElement -4227
KErrGsmMMConditionalIEError -4228
KErrGsmMMIncompatibleMessageWithCallState -4229
KErrGsmMMUnspecifiedProtocolError -4239

Call Control Layer (GSM 04.08)
KErrGsmCCUnassignedNumber -4257
KErrGsmCCNoRouteToTransitNetwork -4258
KErrGsmCCNoRouteToDestination -4259
KErrGsmCCChannelUnacceptable -4262
KErrGsmCCOperatorDeterminedBarring -4264
KErrGsmCCNormalCallClearing -4272
KErrGsmCCUserBusy -4273
KErrGsmCCUserNotResponding -4274
KErrGsmCCUserAlertingNoAnswer -4275
KErrGsmCCCallRejected -4277
KErrGsmCCNumberChanged -4278
KErrGsmCCPreemption -4281
KErrGsmCCNonSelectedUserClearing -4282
KErrGsmCCDestinationOutOfOrder -4283
KErrGsmCCInvalidNumberFormat -4284
KErrGsmCCFacilityRejected -4285
KErrGsmCCResponseToStatusEnquiry -4286
KErrGsmCCNormalUnspecified -4287
KErrGsmCCNoChannelAvailable -4290
KErrGsmCCNetworkOutOfOrder -4294
KErrGsmCCTemporaryFailure -4297
KErrGsmCCSwitchingEquipmentCongestion -4298
KErrGsmCCAccessInformationDiscarded -4299
KErrGsmCCRequestedChannelNotAvailable -4300
KErrGsmCCResourceNotAvailable -4303
KErrGsmCCQualityOfServiceNotAvailable -4305
KErrGsmCCRequestedFacilityNotSubscribed -4306
KErrGsmCCIncomingCallsBarredInCug -4311
KErrGsmCCBearerCapabilityNotAuthorised -4313
KErrGsmCCBearerCapabilityNotCurrentlyAvailable -4314
KErrGsmCCServiceNotAvailable -4319
KErrGsmCCBearerServiceNotImplemented -4321
KErrGsmCCChannelTypeNotImplemented -4322
KErrGsmCCAcmGreaterThanAcmMax -4324
KErrGsmCCRequestedFacilityNotImplemented -4325
KErrGsmCCOnlyRestrictedDigitalInformationBCAvailable -4326
KErrGsmCCServiceNotImplemented -4335
KErrGsmCCInvalidCallReferenceValue -4337
KErrGsmCCChannelDoesNotExist -4338
KErrGsmCCSuspendedCallExistsButCallIdentityDoesNotWork -4339
KErrGsmCCCallIdentityInUse -4340
KErrGsmCCNoCallSuspended -4341
KErrGsmCCRequestedCallIdentityAlreadyCleared -4342
KErrGsmCCUserNotInCug -4343
KErrGsmCCIncompatibleDestination -4344
KErrGsmCCInvalidTransitNetworkSelection -4347
KErrGsmCCIncompatibleSegmentedMessage -4350
KErrGsmCCSemanticallyIncorrectMessage -4351
KErrGsmCCInvalidMandatoryInformation -4352
KErrGsmCCNonExistentMessageType -4353
KErrGsmCCIncompatibleMessageInProtocolState -4354
KErrGsmCCNonExistentInformationElement -4355
KErrGsmCCConditionalIEError -4356
KErrGsmCCIncompatibleMessageInCallState -4357
KErrGsmCCRecoveryOnTimerExpiry -4358
KErrGsmCCUnspecifiedProtocolError -4367
KErrGsmCCUnspecifiedInterworkingError -4383

Supplementary Services Layer (GSM 04.80)
KErrGsmSSUnknownSubscriber -4385
KErrGsmSSIllegalSubscriber -4393
KErrGsmSSBearerServiceNotProvisioned -4394
KErrGsmSSTeleserviceNotProvisioned -4395
KErrGsmSSIllegalEquipment -4396
KErrGsmSSCallBarred -4397
KErrGsmSSIllegalOperation -4400
KErrGsmSSErrorStatus -4401
KErrGsmSSNotAvailable -4402
KErrGsmSSSubscriptionViolation -4403
KErrGsmSSIncompatibility -4404
KErrGsmSSFacilityNotSupported -4405
KErrGsmSSAbsentSubscriber -4411
KErrGsmSSSystemFailure -4418
KErrGsmSSDataMissing -4419
KErrGsmSSUnexpectedDataValue -4420
KErrGsmSSPasswordRegistrationFailure -4421
KErrGsmSSNegativePasswordCheck -4422
KErrGsmSSPasswordAttemptsViolation -4427
KErrGsmSSUnknownAlphabet -4455
KErrGsmSSUssdBusy -4456
KErrGsmSSMaxNumMptyParticipants -4510
KErrGsmSSResourcesUnavailable -4511

SMS Layer (GSM 04.11)
KErrGsmSMSUnassignedNumber -4513
KErrGsmSMSOperatorDeterminedBarring -4520
KErrGsmSMSCallBarred -4522
KErrGsmSMSReserved -4523
KErrGsmSMSNetworkFailure -4529
KErrGsmSMSShortMessageTransferRejected -4533
KErrGsmSMSMemoryCapacityExceeded -4534
KErrGsmSMSDestinationOutOfOrder -4539
KErrGsmSMSUnidentifiedSubscriber -4540
KErrGsmSMSFacilityRejected -4541
KErrGsmSMSUnknownSubscriber -4542
KErrGsmSMSNetworkOutOfOrder -4550
KErrGsmSMSTemporaryFailure -4553
KErrGsmSMSCongestion -4554
KErrGsmSMSResourcesUnavailable -4559
KErrGsmSMSRequestedFacilityNotSubscribed -4562
KErrGsmSMSRequestedFacilityNotImplemented -4581
KErrGsmSMSInvalidShortMessageTransferReferenceValue -4593
KErrGsmSMSUnspecifiedInvalidMessage -4607
KErrGsmSMSInvalidMandatoryInformation -4608
KErrGsmSMSNonExistentMessageType -4609
KErrGsmSMSIncompatibleMessageWithSmsProtocolState -4610
KErrGsmSMSInformationElementNotImplemented -4611
KErrGsmSMSUnspecifiedProtocolError -4623
KErrGsmSMSUnspecifiedInterworkingError -4639

SMS Layer (GSM 03.40)
KErrGsmSMSTelematicInterworkingNotSupported -4640
KErrGsmSMSShortMessageType0NotSupported -4641
KErrGsmSMSCannotReplaceShortMessage -4642
KErrGsmSMSUnspecifiedPIDError -4655
KErrGsmSMSDataCodingSchemeNotSupported -4656
KErrGsmSMSMessageClassNotSupported -4657
KErrGsmSMSUnspecifiedDCSError -4671
KErrGsmSMSCommandCannotBeActioned -4672
KErrGsmSMSCommandNotSupported -4673
KErrGsmSMSUnspecifiedCommandError -4687
KErrGsmSMSTpduNotSupported -4688
KErrGsmSMSServiceCentreBusy -4704
KErrGsmSMSNoSCSubscription -4705
KErrGsmSMSSCSystemFailure -4706
KErrGsmSMSInvalidSMEAddress -4707
KErrGsmSMSDestinationSMEBarred -4708
KErrGsmSMSDuplicateSM -4709
KErrGsmSMSTPVPFNotSupported -4710
KErrGsmSMSTPVPNotSupported -4711
KErrGsmSMSSimSMSStorageFull -4720
KErrGsmSMSNoSMSStorageCapabilityInSim -4721
KErrGsmSMSErrorInMS -4722
KErrGsmSMSMemCapacityExceeded -4723
KErrGsmSMSSimAppToolkitBusy -4724
KErrGsmSMSUnspecifiedErrorCause -4767

SMS / AT Commands (GSM 07.05)
KErrGsmSMSFailureInME -4812
KErrGsmSMSServiceOfMSReserved -4813
KErrGsmSMSOperationNotAllowed -4814
KErrGsmSMSOperationNotSupported -4815
KErrGsmSMSInvalidPDUModeParameter -4816
KErrGsmSMSInvalidTextModeParameter -4817
KErrGsmSMSSimNotInserted -4822
KErrGsmSMSSimPin1Required -4823
KErrGsmSMSPhoneToSimLockRequired -4824
KErrGsmSMSSimFailure -4825
KErrGsmSMSSimBusy -4826
KErrGsmSMSSimWrong -4827
KErrGsmSMSSimPuk1Required -4828
KErrGsmSMSPin2Required -4829
KErrGsmSMSPuk2Required -4830
KErrGsmSMSMemoryFailure -4832
KErrGsmSMSInvalidMemoryIndex -4833
KErrGsmSMSMemoryFull -4834
KErrGsmSMSUnknownSCAddress -4842
KErrGsmSMSNoNetworkService -4843
KErrGsmSMSNetworkTimeout -4844
KErrGsmSMSCnmaAckNotExpected -4852
KErrGsmSMSUnknownError -5012

URI Utils Errors
KUriUtilsErrBadComponentIndex -5000 Error specifying the use of an invalid component index
KUriUtilsErrBadBasePath -5001 Error specifying the use of a base uri path is not absolute and not empty
KUriUtilsErrBufferOverflow -5002 Error specifying that a buffer is not big enough to append a component and delimiters
KUriUtilsErrBadDelimitedParserMode -5003 Error specifying the use of an supported parsing mode
KUriUtilsErrNoDelimiter -5004 Error specifying that the delimiting character is not set
KUriUtilsErrNotParsed -5005 Error specifying that the data has not been parsed
KUriUtilsErr16BitChar -5006 Error specifying that a 16-bit character was found in data to be escape encode
KUriUtilsErrBadEscapeTriple -5007 Error specifying that a badly formed escape triple was found in data being escape decoded
KUriUtilsCannotConvert -5008 Error specifying that charconv was unable to convert the input data
KUriUtilsErrEmptyData -5009 Error specifying that there was empty data
KUriUtilsErrNoIntegerInData -5010 Error specifying that there is no character representation of an integer
KUriUtilsErrInvalidUri -5011 Error code specifying an invalid uri
KUriUtilsErrBadEscapeMode -5012 Error code for unsupported escaping mode
KUriUtilsErrBadTextRemoveMode -5013 Error code for unsupported text whitespace removal mode
KUriUtilsErrDecodeMalformedQuotedString -5014 Quoted string could not be decoded as it is malformed

GSM AT Commands Errors
KErrGsm0707PhoneFailure -5024
KErrGsm0707NoConnectionToPhone -5025
KErrGsm0707PhoneLinkReserved -5026
KErrGsm0707OperationNotAllowed -5027
KErrGsm0707OperationNotSupported -5028
KErrGsm0707PhoneToSimLockRequired -5029
KErrGsm0707SimNotInserted -5034
KErrGsm0707SimPin1Required -5035
KErrGsm0707SIMPuk1Required -5036
KErrGsm0707SimFailure -5037
KErrGsm0707SimBusy -5038
KErrGsm0707SimWrong -5039
KErrGsm0707IncorrectPassword -5040
KErrGsm0707SimPin2Required -5041
KErrGsm0707SIMPuk2Required -5042
KErrGsm0707MemoryFull -5044
KErrGsm0707InvalidIndex -5045
KErrGsm0707NotFound -5046
KErrGsm0707MemoryFailure -5047
KErrGsm0707TextStringTooLong -5048
KErrGsm0707InvalidCharsInTextString -5049
KErrGsm0707DialStringTooLong -5050
KErrGsm0707InvalidCharsInDialString -5051
KErrGsm0707NoNetworkService -5054
KErrGsm0707NetworkTimeout -5055
KErrGsm0707UnknownError -5124

TCP/IP (v6)
TCP/IP v6
tcpip6_error_NoDestination -5100 IPv6: flow has no destination address
tcpip6_error_NoPathMtu -5101 IPv6: Misconfigured driver not giving proper MTU
tcpip6_error_ShortPacket -5102 IPv6: A packet in RMBUF is too short
tcpip6_error_DuplicateAddress -5103 IPv6: Duplicate address detected on a device
tcpip6_error_AddressExpired -5104 IPv6: Source Address used by connection has expired
tcpip6_error_NoRoute -5105 IPv6: No route available

DND
DndTimedOut -5120 No response from DNS server
DndHostNotFound -5121 Host not found
DndInternalError -5122 Internal error in host name resolver
DndInternalError -5123 Internal error in host name resolver
DndInternalError -5124 Internal error in host name resolver
DndNoAnswer -5125 DNS server couldn’t answer query
DndNoAnswer -5126 DNS server couldn’t answer query
DndHostNotFound -5127 Host not found
DndNoAnswer -5128 DNS server couldn’t answer query
DndRefused -5129 DNS server refused connection
DndInternalError -5130 Internal error in host name resolver
DndHostNotFound -5131 Host not found
DndNameTooBig -5132 Invalid Host Name (too long)
DndInternalError -5133 Internal error in host name resolver
DndRetry -5134

IPSEC Errors
EIpsec_NotANATTPacket -5154 UDP packet is NOT a NAT Taversal packet
EIpsec_NoInnerSource -5155 Cannot find inner-src for outbound packet when tunneling (for SECPOL)
EIpsec_LostSA -5156 An SA has been lost betweenApply andVerify, expired? (for SECPOL)
EIpsec_IcmpError -5157 An ICMP error report containing AH orESP (for INET6)
EIpsec_PolicyUnknownSelector -5158 unknown selector keyword
EIpsec_PolicyInboundOutbound -5159 Only one of the ’inbound’ or ’outbound’ is allowed
EIpsec_PolicyIpMaskExpected -5160 Expected IP address (as mask) here
EIpsec_PolicyIpAddressExpected -5161 Expected IP address here
EIpsec_PolicyInvalidIpAddress -5162 Invalid IP address
EIpsec_PolicyRightParen -5163 Right parenthesis expected
EIpsec_PolicyLeftParen -5164 Left parenthesis expected
EIpsec_PolicySpecNotFound -5165 SA specification is not defined before reference in selector
EIpsec_PolicySyntaxError -5166 Generic delimiter error inspecification
EIpsec_PolicySpecName -5167 SA specification name missing or invalid
EIpsec_PolicyNoEncryptAlgorithm -5168 ESP specification must include encryptionb algorithm
EIpsec_PolicyNoAuthAlgorithm -5169 AH specification must include authentication algorithm
EIpsec_PolicyTooManyTypes -5170 Type can be specified onlyonce for specification
EIpsec_PolicyNoType -5171 SA type (AH or ESP) omittedfromspecification
EIpsec_PolicyCloseBraceExpected -5172 closing brace expected
EIpsec_PolicyNumberExpected -5173 number value expected
EIpsec_PolicyUnknownSpec -5174 unknown policy specification keyword
EIpsec_PolicyInvalidIdentity -5175 invalid identity syntax
EIpsec_PolicyIdentityDefined -5176 identify already defined
EIpsec_PolicyUnknownAuth -5177 algorithm not defined in algorithm map
EIpsec_PolicyUnknownEncrypt -5178 algorithm not defined in algorithm map
EIpsec_UnavailableDigest -5179 No installed library implements the digest
EIpsec_UnavailableCipher -5180 No installed library implements the cipher
EIpsec_UnknownDigestNumber -5181 Attempting to use algorithmnumber that is not known
EIpsec_UnknownCipherNumber -5182 Attempting to use algorithmnumber that is not known
EIpsec_BadCipherKey -5183 Key in SA is too short (forthe algorithm) or is weak
EIpsec_MismatchDestinationIdentity -5184 destination identity does not match
EIpsec_MismatchSourceIdentity -5185 source identity does not match
EIpsec_MismatchProtocol -5186 protocol does not match
EIpsec_MismatchDestinationPort -5187 destination port does not match
EIpsec_MismatchSourcePort -5188 source port does not match
EIpsec_MismatchProxy -5189 proxy address does not match
EIpsec_MismatchSource -5190 source address does not match
EIpsec_MismatchReplayWindow -5191 ReplayWindow length is shorter than required
EIpsec_MismatchedEncryptAlg -5192 Encrypt algorithm doesn’t match
EIpsec_MismatchedAuthAlg -5193 Auth algorithm doesn’t match
EIpsec_MismatchedPFS -5194 PFS bit is not same
EIpsec_MismatchedType -5195 SA Type (AH/ESP) does not match
EIpsec_MismatchedDestination -5196 SA destination does not match (internal error?)
EIpsec_AcquireFailed -5197 Acquiring SA failed (no SAavailableor negotiated)
EIpsec_EspBadCipherBlockSize -5198 Configuration error, cipherblock size must be < 256
EIpsec_EspSequenceWrap -5199 Outbound sequence # wrappedaround for this SA
EIpsec_AhSequenceWrap -5200 Outbound sequence # wrappedaround for this SA
EIpsec_AhPacketTooLong -5201 Outbound packet would exeed2**16-1 with AH
EIpsec_AhRMBufSplit -5202 Inbound AH processing failed (Memory?)
EIpsec_NoBundle -5203 Incoming packet had transforms, but policy doesn’t require any
EIpsec_TooManyTransforms -5204 Incoming packet had more transforms than policy requires
EIpsec_UnrequiredSA -5205 Applied SA where policy hasnone
EIpsec_MismatchedSA -5206 Applied SA does not match the policy
EIpsec_TunnelMismatch -5207 Tunnelmode does not match the policy
EIpsec_TooFewTransforms -5208 Incoming packet has less transforms than policy requires
EIpsec_MaxTransforms -5209 Incoming packet exceed configured maxlimit of transforms
EIpsec_NoSelectorMatch -5210 None of the policy selectors matched
EIpsec_OutboundPending -5211 Outbooud SA does not exits,ACQUIRE pending
EIpsec_OutboundNotFound -5212 Outbound SA does not exist,ACQUIRE started
EIpsec_ReplayDuplicate -5213 Duplicate packet (replay window test)
EIpsec_EspPadLength -5214 The ESP pad length is corrupt (probably wrong key)
EIpsec_EspPadByte -5215 The ESP pad byte content isinvalid (probably wrong key)
EIpsec_DataAlignment -5216 Data not aligned by block size
EIpsec_PacketLength -5217 Invalid lenght of the packet
EIpsec_AhAuthentication -5218 Authentication check failedin AH
EIpsec_AhIcvLength -5219 ICV length in packet does not match algorithm
EIpsec_AhInboundSA -5220 The inbound SA for AH doesnot exist
EIpsec_AhAuthAlg -5221 Required auth algorithm forAH not available/installed
EIpsec_EspEncrAlg -5222 Required encrypt algorithmfor ESP not available/installed
EIpsec_EspAuthAlg -5223 Required auth algorithm forESP not available/installed
EIpsec_EspAuthentication -5224 Authentication check failedin ESP
EIpsec_EspInboundSA -5225 The inbound SA for ESP doesnot exist
EIpsec_CorruptPacketOut -5226 Corrupt packet after IPSECoperations
EIpsec_CorruptPacketIn -5227 Truncated or corrupt packetor header(in)
EIpsec_RMBUF -5228 RMBUF operation failed unexpectedly

WAP: WSP, WTP, WDP and WTLS Errors
RWAPConn::EMoreData -5500
RWAPConn::EBearerError -5499
RWAPConn::EPortAlreadyBound -5498
RWAPConn::ECannotOpenPort -5497
RWAPConn::ETooManyConnections -5496
RWAPConn::EBadConnection -5495
RWAPConn::EBufferTooSmall -5494

RWSPCOConn::EBufferTooSmall -5475
RWSPCOConn::EInvalidSession -5474
RWSPCOConn::EInvalidTransaction -5473
RWSPCOConn::EParameterError -5472
RWSPCOConn::ESessionNotConnected -5471
RWSPCOConn::ENotSupported -5470
RWSPCOConn::EInvalidState -5469
RWSPCOConn::ESessionClosed -5468
RWSPCOConn::EMRUExceeded -5467
RWSPCOConn::EInvalidBufferSize -5466
RWSPCOConn::EDataNotAvailable -5465
RWSPCOConn::EErrorTimeout -5464

RWSPCLConn::EBufferTooSmall -5450
RWSPCLConn::EInvalidSession -5449
RWSPCLConn::EParameterError -5448
RWSPCLConn::ESessionNotConnected -5447
RWSPCLConn::ENotSupported -5446
RWSPCLConn::EInvalidState -5445
RWSPCLConn::ESessionClosed -5444
RWSPCLConn::EMRUExceeded -5443
RWSPCLConn::EInvalidBufferSize -5442
RWSPCLConn::EDataNotAvailable -5441
RWSPCLConn::EErrorTimeout -5440

RWTPConn::ENoMemory -5425
RWTPConn::EBadArgument -5424
RWTPConn::EProviderProtoErr -5423
RWTPConn::EProviderAbortInvalidTID -5422
RWTPConn::EProviderAbortNoClass2 -5421
RWTPConn::EProviderAbortNoSAR -5420
RWTPConn::EProviderAbortNoUACK -5419
RWTPConn::EProviderAbortVers1 -5418
RWTPConn::EProviderAbortNoResponse -5417
RWTPConn::EProviderAbortMsgTooLarge -5416
RWTPConn::EProviderAbortGeneral -5415
RWTPConn::EShutdownError -5414

RWDPConn::EInvalidParameter -5400

RWTLS::EOutOfMemory -5375
RWTLS::ESocketError -5374
RWTLS::EBadParameters -5373
RWTLS::ESocketError2 -5372
RWTLS::EResumeIDNotFound -5371
RWTLS::EResumeError -5370
RWTLS::ERenegotiationRequest -5369
RWTLS::EIllegalCall -5368
RWTLS::EConnectionCloseNotify -5367
RWTLS::ESessionCloseNotify -5366
RWTLS::ENoConnection -5365
RWTLS::EUnexpectedMessage -5364
RWTLS::EBadRecordMac -5363
RWTLS::EDecryptionFailed -5362
RWTLS::ERecordOverflow -5361
RWTLS::EHandshakeFailure -5360
RWTLS::EDecompressionFailure -5359
RWTLS::EBadCertificate -5358
RWTLS::EUnsupportedCertificate -5357
RWTLS::ECertificateRevoked -5356
RWTLS::ECertificateExpired -5355
RWTLS::ECertificateUnknown -5354
RWTLS::EIllegalParameter -5353
RWTLS::EUnknownCA -5352
RWTLS::EAccessDenied -5351
RWTLS::EDecodeError -5350
RWTLS::EDecryptError -5349
RWTLS::EUnknownKeyId -5348
RWTLS::EDisableKeyId -5347
RWTLS::EKeyExchangeDisabled -5346
RWTLS::ESessionNotReady -5345
RWTLS::EUnknownParameterIndex -5344
RWTLS::EDuplicateFinishedRecv -5343
RWTLS::EExportRestriction -5342
RWTLS::EProtocolVersion -5341
RWTLS::EInsufficientSecurity -5340
RWTLS::EInternalError -5339
RWTLS::EUserCanceled -5338
RWTLS::ENoRenegotiation -5337
RWTLS::EErrGeneral -5336
RWTLS::EErrBulk -5335
RWTLS::EErrMac -5334
RWTLS::EErrSequenceNumberMode -5333
RWTLS::EErrKeyRefreshRate -5332
RWTLS::EUnknownPolicy -5331

OBEX
KErrIrObexClientNoDevicesFound -5501 "No other device found"
KErrIrObexClientPeerDoesNotHaveObex -5502 "Other device cannot handle OBEX"
KErrIrObexClientPutPeerAborted -5503 "Other device aborted the transfer"
KErrIrObexServerPutPeerAborted -5507 "Peer device aborted data transmission/OBEX sending"
KErrIrObexConnectChallRejected -5512 "Authentication challenge rejected"
KErrIrObexRespSuccess -5532
KErrIrObexRespCreated -5533
KErrIrObexRespAccepted -5534
KErrIrObexRespNonAuthInfo -5535
KErrIrObexRespNoContent -5536
KErrIrObexRespResetContent -5537
KErrIrObexRespPartialContent -5538
KErrIrObexRespMultipleChoices -5548
KErrIrObexRespMovedPerm -5549
KErrIrObexRespMovedTemp -5550
KErrIrObexRespSeeOther -5551
KErrIrObexRespNotModified -5552
KErrIrObexRespUseProxy -5553
KErrIrObexRespBadRequest -5564
KErrIrObexRespUnauthorized -5565
KErrIrObexRespPaymentRequired -5566
KErrIrObexRespForbidden -5567
KErrIrObexRespNotFound -5568
KErrIrObexRespMethodNotAllowed -5569
KErrIrObexRespNotAcceptable -5570
KErrIrObexRespProxyAuthenReqd -5571
KErrIrObexRespTimedOut -5572
KErrIrObexRespConflict -5573
KErrIrObexRespGone -5574
KErrIrObexRespLengthReqd -5575
KErrIrObexRespPreCondFailed -5576
KErrIrObexRespReqEntityTooLarge -5577
KErrIrObexRespReqURLTooLarge -5578
KErrIrObexRespUnsupMediaType -5579
KErrIrObexRespInternalError -5580
KErrIrObexRespNotImplemented -5581
KErrIrObexRespBadGateway -5582
KErrIrObexRespServiceUnavail -5583
KErrIrObexRespGatewayTimeout -5584
KErrIrObexRespHTTPVerNotSupp -5585
KErrIrObexRespDatabaseFull -5596
KErrIrObexRespDatabaseLocked -5597
VCard/VCal Parser Errors
KVersitErrCodeBase -5750
KVersitErrBadDateTime -5751
KVersitErrRepeatTypeNotHandled -5752
KVersitErrBadRepeatValue -5753
KVersitErrBadTimeZone -5754
KVersitErrBadTimePeriod -5755
KVersitErrNumberExpected -5756
KVersitErrNestedVcardExpected -5757
KVersitErrNoPropertyName -5758

Bluetooth Errors
HCI THCIErrorCode Global Error Code
EOK 0x00 -6000
EUnknownOpcode 0x01 -6001
ENoConnection 0x02 -6002
EHardwareFail 0x03 -6003
EPageTimedOut 0x04 -6004
EAuthenticationFailure 0x05 -6005
EKeyMissing 0x06 -6006
EKeyMemoryFull 0x07 -6007
EConnectionTimeout 0x08 -6008
EMaxConnections 0x09 -6009
EMaxSCOConnections 0x0a -6010
EMaxACLConnections 0x0b -6011
ECommandDisallowed 0x0c -6012
EHostResourceRejection 0x0d -6013
EHostSecurityRejection 0x0e -6014
EHostPersonalDeviceRejection 0x0f -6015
ERemoteHostTimeout 0x10 -6016
EUnsupportedParameter 0x11 -6017
EInvalidHCIParameter 0x12 -6018
ERemoteUserEndedConnection 0x13 -6019
ERemoteLowResources 0x14 -6020
ERemoteAboutToPowerOff 0x15 -6021
ETerminatedByLocalHost 0x16 -6022
ERepeatedAttempts 0x17 -6023
EPairingNotAllowed 0x18 -6024
EUnknownLMPpdu 0x19 -6025
EUnsupportedRemoteLMPFeature 0x1a -6026
ESCOOffsetRejected 0x1b -6027
ESCOIntervalRejected 0x1c -6028
ESCOAirModeRejected 0x1d -6029
EInvalidLMPParameters 0x1e -6030
EUnspecifiedError 0x1f -6031
EPending 0x20 -6032

L2CAP
KErrBadAddress -6300
KErrSAPUnexpectedEvent -6301
KErrBadPacketReceived -6302
KErrL2CAPBadResponse -6303
KErrHCIConnectFailed -6304
KErrHCILinkDisconnection -6305
KErrSAPNotConnected -6306
KErrConfigBadParams -6307
KErrConfigRejected -6308
KErrConfigUnknownOptions -6309
KErrL2PeerDisconnected -6310
KErrL2CAPAccessRequestDenied -6311
KErrL2CAPRequestTimeout -6312
KErrL2PeerRejectedCommand -6313
KErrHostResNameTooLong -6314
KErrHostResNoMoreResults -25
KErrL2HostResNoMoreResults -25

RFCOM
KErrRfcommSAPUnexpectedEvent -6350
KErrRfcommAlreadyBound -6351
KErrRfcommBadAddress -6352
KErrRfcommMTUSize -6353
KErrRfcommFrameResponseTimeout -6354
KErrRfcommMuxRemoteDisconnect -6355
KErrRfcommNotBound -6356
KErrRfcommParameterNegotiationFailure -6357
KErrRfcommNotListening -6358
KErrRfcommNoMoreServerChannels -6359

Bluetooth AVCTP Error Codes
KErrAvctpBadAddress -6400 AVCTP bad address
KErrAvctpSAPUnexpectedEvent -6401 AVCTP unexpected SAP event
KErrAvctpBadPacketReceived -6402 AVCTP bad packet received
KErrAvctpBadResponse -6403 AVCTP bad response
KErrAvctpConnectFailed -6404 AVCTP connect failed
KErrAvctpLinkDisconnection -6405 AVCTP link disconnection
KErrAvctpSAPNotConnected -6406 AVCTP SAP not connected
KErrAvctpPeerDisconnected -6407 AVCTP peer disconnection
KErrAvctpAccessRequestDenied -6408 AVCTP access request denied
KErrAvctpRequestTimeout -6409 AVCTP request timeout
KErrAvctpPeerRejectedCommand -6410 AVCTP peer rejected command

Bluetooth SDP Error Codes
KErrSdpAlreadyBound -6400 Cannot bind to specifed sockets protocol, as already bound
KErrSdpPeerError -6401 Remote device gave unknown error
KErrSdpClientNotConnected -6402 Local device is not connected
KErrSdpUnsupportedVersion -6403 Invalid/unsupported SDP version
KErrSdpBadRecordHandle -6404 Invalid Service Record Handle
KErrSdpBadContinuationState -6405 Invalid ContinuationState
KErrSdpServerRejectedRequest -6406 SDP server rejected the request
KErrSdpBadRequestBufferLength -6407 Request buffer was ill-formed
KErrSdpBadResultBufferLength -6408 Result buffer was ill-formed
KErrSdpBadUUIDLength -6409 UUID entry was ill-formed
KErrSdpBadResultData -6410 Response was ill-formed
KErrSdpDatabaseFull -6411 SDP database is full
Bluetooth Link manager Error Codes
KErrInsufficientBasebandResources -6450 Insufficient baseband resources error value
KErrProxyWriteNotAvailable -6451 Proxy write not available error value
KErrReflexiveBluetoothLink -6452 Reflexive BT link error value

Message Server Error Codes
KMsvMediaUnavailable -7000 There is no disk in the drive containing the Message Server index
KMsvMediaIncorrect -7001 There is a disk in the drive containing the Message Server index, but it is the wrong one
KMsvMediaChanged -7002
KMsvIndexBackup -7003
KMsvIndexRestore -7004

HTTP Error Codes
KErrHttpEncodeDefault -7200 Error making a default encoding of unrecognised headers
KErrHttpEncodeAccept -7201 Error encoding the Accept field
KErrHttpEncodeAcceptCharset -7202 Error encoding the Accept-Charset field
KErrHttpEncodeQValue -7203 Error encoding a q -value parameter
KErrHttpEncodeAuthorization -7204 Error encoding the Authorization field
KErrHttpEncodeBasicAuth -7205 Error encoding Basiccredentials
KErrHttpEncodeDigestAuth -7206 Error encoding Digestcredentials
KErrHttpEncodeConnection -7207 Error encoding the Connection field
KErrHttpEncodeContentLength -7208 Error encoding the Content-Length field
KErrHttpEncodeContentType -7209 Error encoding the Content-Type field
KErrHttpEncodeHost -7210 Error encoding the Host field
KErrHttpEncodeHostPort -7211 Error encoding the Host field’s port parameter
KErrHttpEncodeTransferEncoding -7212 Error encoding the Transfer-Encoding field
KErrHttpEncodeUserAgent -7213 Error encoding the User-Agent field
KErrHttpEncodeDate -7214 Error encoding the Date field
KErrHttpEncodeCookie -7215 Error encoding the Cookie field
KErrHttpEncodeCacheControl -7216 Error encoding the Cache-Control field
KErrHttpEncodePragma -7217 Error encoding the Pragma field
KErrHttpEncodeIfMatch -7218 Error encoding the ifmatch field
KErrHttpEncodeIfNoneMatch -7219 Error encoding the ifnone match field
KErrHttpEncodeIfModifiedSince -7220 Error encoding the ifmodified since field
KErrHttpEncodeIfUnmodifiedSince -7221 Error encoding the ifunmodified since field
KErrHttpEncodeCookie2 -7222 Error encoding the Cookie2 field
KErrHttpDecodeMalformedDate -7260 General formatting error for date values
KErrHttpDecodeMalformedYear -7261 Malformed year
KErrHttpDecodeMalformedMonth -7262 Malformed short monthname
KErrHttpDecodeMalformedDay -7263 Malformed number of day in month
KErrHttpDecodeMalformedWkDay -7264 Malformed short day name
KErrHttpDecodeMalformedWeekDay -7265 Malformed long day name
KErrHttpDecodeMalformedInteger -7266 Malformed integer value
KErrHttpDecodeMalformedQuotedStr -7267 Malformed quoted string
KErrHttpDecodeAccept -7270 Error decoding the Accept field
KErrHttpDecodeConnection -7271 Error decoding the Connection field
KErrHttpDecodeContentLength -7272 Error decoding the Content-Length field
KErrHttpDecodeContentType -7273 Error decoding the Content-Type field
KErrHttpDecodeTransferEncoding -7274 Error decoding the Transfer-Encoding field
KErrHttpDecodeWWWAuthenticate -7275 Error decoding the WWWAuthenticate field
KErrHttpDecodeUnknownAuthScheme -7276 The WWWAuthenticate field contained an unrecognised authentication scheme
KErrHttpDecodeBasicAuth -7277 Error decoding a Basic WWWAuthenticate challenge
KErrHttpDecodeDigestAuth -7278 Error decoding a Digest WWWAuthenticate challenge
KErrHttpDecodeCookie -7279 Error decoding a Set-Cookie field
KErrHttpRedirectExceededLimit -7300 A uri redirected too many times, possibly indicating a circular redirection
KErrHttpRedirectUseProxy -7301 A server responded that the uri must be fetched via a proxy
KErrHttpRedirectNoLocationField -7302 A server sent a redirection response that did not include a Location header
KErrHttpUnknownParseState -7303 An error occured in parsing which left the parser in a unknown state
KErrHttpRequestHasBody -7330 A body is provided with a method that doesn’t allow bodys to be transmitted
KErrHttpRequestBodyMissing -7331 A body is missing from a method that requires it
KErrHttpTraceReqWithoutMaxForwardHeader -7332 Should contain The Max-Forward header
KErrHttpPostReqBodyWithoutSizeOnHTTP10 -7333 Body must NOT be sent chunked if using HTTP/1.0
KErrHttpInvalidHeaderInRequest -7334 Request contained a response header or a entity header but no body
KErrHttpEntityHeaderMissingContentType -7360 A body was provided in the request but no Content-Type header was set
KErrHttpGeneralHeaderMissingHost -7361 The request URI was relative, but no Host header was set to indicate a server to connect to
KErrHttpCantResetRequestBody -7370 The request body needed to be rewound but the client but it doesn’t support
KErrHttpProtTransactionNotInitialised -7371 The Protocol handler is not initialised
KErrHttpCannotEstablishTunnel -7372 Unable to establish a tunnel.
KErrHttpInvalidUri -7373 Invalid URI
KErrHttpNonPipeliningError -7374 Protocol handler experienced a non-pipelining error
KErrHttpPipeliningError -7375 Protocol handler experienced a pipelining error

TLS
KErrSSLNoSharedCipher -7401 No shared cipher was found. The handshake failed because there was no available shared cipher supported by both the client and the server.
KErrSSLSocketBusy -7402 The socket already has received data pending on it. This error is seen when StartClientHandshake is called when there is already data waiting to be read from the socket.
KErrSSLInvalidCipherSuite -7403 One or more cipher suites passed as an argument was invalid.
KErrSSLInvalidCert -7404 The certificate that was passed as an argument was invalid.
KErrSSLNoClientCert -7405 No client certificate was supplied.
KErrSSLUnsupportedKeySize -7406 The size of the key is too big.
KErrSSLUnsupportedKey -7407 General unsupported key error
KErrSSLBadRecordHeader -7408 An invalid record was received.
KErrSSLBadProtocolVersion -7409 Invalid protocol version
KErrSSL2ServerOnly -7410 The server only supports the SSL2.0 protocol.
KErrSSLUnexpectedMessage -7411 Unexpected message.
KErrSSLUnsupportedCipher -7412 Unsupported cipher.
KErrSSLBadMAC -7413 Bad MAC.
KErrSSLReceivedAlert -7414 An SSL alert was received from the remote end, which caused the connection to be terminated.
KErrSSLRecvNotSupportedHS -7415 An invalid handshake message was received.
KErrSSLHSRecordFieldTooBig -7416 A field in the handshake record being parsed was too big.
KErrSSLRecordHeaderTooBig -7417 Record header field too big.
KErrSSLSendDataTooBig -7418 Send data field too big.
KErrSSLNoCertificate -7419 No certificate.
KErrSSLInvalidHash -7420 Invalid hash.
KErrSSLSendCanceled -7421 Send cancelled.
KErrSSLRecvCanceled -7422 Receieve cancelled.
KErrSSLHandshakeCanceled -7423 CancelHandshake was called during one of the handshake methods.
KErrSSLWriteFailed -7424 Write failed.
KErrSSLFailedToLoad -7425 The SSL.dll couldn’t be loaded by the adaptor.
KErrSSLDisconnectIndication -7426 An unspecified error was signaled from the SSL.dll to the adaptor.
KErrSSLDllLeave -7427 A leave occured in the SSL.dll.
KErrSSLAlertCloseNotify -7500 Close notification.
KErrSSLAlertUnexpectedMessage -7510 An inappropriate message was received.
KErrSSLAlertBadRecordMac -7520 A record was received withan incorrect MAC.
KErrSSLAlertDecryptionFailed -7521 A TLS cipher text was decrypted in an invalid way.
KErrSSLAlertRecordOverflow -7522 A TLS cipher text record was received which was too long.
KErrSSLAlertDecompressionFailure -7530 The decompression functionreceived improper input.
KErrSSLAlertHandshakeFailure -7540 With given the options available, the sender was unable to negotiate an acceptable set of security parameters.
KErrSSLAlertNoCertificate -7541 No certificate.
KErrSSLAlertBadCertificate -7542 A certificate was corrupt,e.g. contained signatures that could not be verified.
KErrSSLAlertUnsupportedCertificate -7543 The certificate was of an unsupported type.
KErrSSLAlertCertificateRevoked -7544 The certificate was revoked.
KErrSSLAlertCertificateExpired -7545 The certificate was expired.
KErrSSLAlertCertificateUnknown -7546 An unspecified problem withthe certificate. Certificate can not be used.
KErrSSLAlertIllegalParameter -7547 A field in the handshake was out of range or inconsistent with other fields.
KErrSSLAlertUnknownCA -7548 Either the CA certificate could not be located or the CA could not be matched with a known trusted CA.
KErrSSLAlertAccessDenied -7549 A valid certificate was received, but the access control denied access.
KErrSSLAlertDecodeError -7550 A message could not be decoded, e.g. some field was out of the specified range.
KErrSSLAlertDecryptError -7551 A handshake cryptographic operation failed.
KErrSSLAlertExportRestriction -7560 A negotiation was not allowed due to export restrictions.
KErrSSLAlertProtocolVersion -7570 The protocol version was not supported, e.g. the client has attempted to negotiate a recognised, but unsupported protocol.
KErrSSLAlertInsufficientSecurity -7571 Returned instead of KErrSSLAlertHandshakeFailure when the negotiation fails because the server requests ciphers more secure than those supported by the client.
KErrSSLAlertInternalError -7580 An internal error.
KErrSSLAlertUserCanceled -7590 This handshake is being cancelled by the user.
KErrSSLAlertNoRenegotiation -7600 No renegotiation will be accepted.
SyncML
KErrTransportRequest -8321 The transport cannot send data as created.
KErrTransportHeader -8322 The transport has not been suitably configured.
KErrTransportSvrNoUri -8323 The URI does not exist.
KErrTransportSvrError -8324 There was a transport server error.
KErrTransportAuthenticationFailure -8325 Transport Authentification failure.
KErrTransportDisconnected -8326 Transport disconnected the session.
KErrSyncEngineErrorBase -8327 Base value for engine-related errors.
KErrConnectionError -8328 Transports could not connect to the server.
KErrCannotCommunicateWithServer -8329 Could not communicate with the server: possibly a time-out occurred.
KErrDatabaseAdapterIndexError -8330 Database adapter failed to create an item.
KErrParseCallbackError -8331 Currently unused.
KErrCommandInvalid -8332 Currently unused.
KErrSessionIdNotValid -8333 Invalid session ID.
KErrVerDTDMissing -8334 SyncML message did not specify a DTD version.
KErrProtoMissing -8335 SyncML message did not specify a protocol.
KErrSyncHdrMissing -8336 Currently unused.
KErrTargetLocMissing -8337 SyncML message did not specify a target location.
KErrSourceLocMissing -8338 SyncML message did not specify a source location.
KErrTargetLocNameMissing -8339 Currently unused.
KErrSourceLocNameMissing -8340 Currently unused.
KErrMappingInfoMissing -8341 Mapping of added item could not created.
KErrMappingInfoNotAcked -8342 Mapping has not been acknowledged by the server.
KErrVersionDTDNotSupported -8343 SyncML message specified an unsupported DTD version.
KErrProtoNotSupported -8344 SyncML message specified an unsupported protocol.
KErrStatusCommandForCommandNotSent -8345 A status was received for a cmdId, butthis cmdIdwas not sent.
KErrStatusCommandNotTheSame -8346 A status was received but the commandstringdoesnot matched the received one.
KErrMissingStatusCommands -8347 Status command(s) were expected but are missing.
KErrFailedToAddRecord -8348 Failed to add record in database.
KErrFailedToReplaceRecord -8349 Failed to replace record in database.
KErrFailedToDeleteRecord -8350 Failed to delete record in database.
KErrXmlParsingError -8351 XML parsing error.
KErrReferenceToolkitError -8352 There was an error reported in the reference toolkit.
KErrClientDatabaseNotFound -8404 No suitable database was found on the client device.
KErrServerDatabaseNotFound -8405 No suitable database was found on the server.
KErrDevInfFileNotFound -8406 Currently unused.
KErrObjectTooLargeToSendToServer -8407 Object is too large to send to server.
KErrSlowSync -8408 Sync is going to be slow.
KErrFailedToGetRecord -8409 Failed to get record from DevMan.
KErrUserInteractionFailed -8410 User interaction failed.
KErrStatusSizeMismatch -8411 Large object size mismatch.
KErrFailedToCloseDatabase -8412 Data Provider close failed.
KErrMessageTooShort -8451 Push message is too short
KErrMessageIsCorrupt -8452 Push message is corrupt
KErrBadTransportId -8453 Profile has no Transport ID
KErrNoNotificationBody -8454 Push message has no body
KErrWrongVersion -8455 Push message specifies an unsupportedversion
KErrUnsupportedMimeType -8456 Push message specifies an unsupportedversion
KErrNoSuchTask -8457 Currently unused
KErrUnknownSyncType -8458 Push message specifies an unknown typeof sync
KErrUnknownProfile -8459 Push message specifies an unknown profile
KErrInvalidProfile -8460 Currently unused
KErrInvalidCredentials -8461 Unsupported (USERNETWPIN or USERPIN) securitymechanism specified
KErrNoCredentials -8462 Currently unused
KErrIntegrityFailureHMAC -8463 Failed to verify the generated HMAC value
KErrMustUsageUriNotComplete -8464 Currently unused
KErrDMAccUriIsCorrupt -8465 Push message has invalid DM account URI
KErrDMConUriIsCorrupt -8466 Push message has invalid DM connectionURI
KErrParmNameNotInProvDoc -8468 Push message has missing characteristic
KErrInvalidAppIdValue -8469 Push message has missing or invalid App Id
KErrInvalidToNapIdValue -8470 Push message has missing or invalid TO-NAPID
KErrInvalidProviderIdValue -8471 Push message has missing or invalid Provider-ID
KErrEmptyAauthLevelValue -8472 Push message has missing or invalid AAUTHLEVEL
KErrAppSrvAAuthLevelNotFound -8473 Push message has missing or invalid APPSRV
KErrClientAAuthLevelNotFound -8474 Push message has missing or invalid AppAuth Client
KErrInvalidAppAuth -8475 Currently unused
KErrNoApplicationCharac -8476 Push message has missing or invalid APPLICATION characteristic
KErrNoAppAuthCharac -8478 Push message has missing or invalid APPAUTH characteristic
KErrMissingRequiredParmInSvr -8480 Currently unused
KErrMissingRequiredParmInClient -8481 Currently unused
KErrAppAddrCharacNotFound -8484 Missing APPADDR characteristic or subcharacteristic
KErrUnsupportedVersion -8485 Unsupported WBXML version
KErrWrongProvPublicDocId -8486 Prov Document identifier not WAP Provisoningversion 1.0
KErrProfileNotFound -8501 The requested profile does not exist
KErrConnectionNotFound -8502 The requested connection does not exist within the profile
KErrTaskNotFound -8503 The requested task does not exist within theprofile
KErrTransportNotFound -8504 The requested transport adaptor does not exist
KErrDataProviderNotFound -8505 The requested data provider does not exist
KErrJobNotFound -8506 The requested job has completed
KErrObjectPendingDelete -8507 The requested object is pending deletion
KErrObjectInUse -8508 The object to modify or delete is currently in use
KErrProfileAccessDenied -8509 The specified profile is not available, e.g. a Device Management profile, or open foredit by another client
KErrSuspended -8510 The requested data stream cannot be found intheData Store
KErrDataDepotStreamNotFound -8511 The requested data stream cannot be found intheData Store
XML Parser
KErrXMLBadAttributeValue -9001 XML attribute value
KErrXMLBadAttributeName -9002 XML attribute name
KErrXMLInvalidChild -9003 Invalid XML child element
KErrXMLBadNesting -9004 XML element nesting
KErrXMLIncomplete -9005 XML element incomplete
KErrXMLBadElementName -9006 XML element name
KErrXMLDuplicateDocTypeTags -9007 Error code that indicates that more than one DOCTYPE tag has been encountered: the first one encountered will be used
KErrXMLDuplicateVersionTags -9008 Error code that indicates that more than one XML version tag has been encountered: the first one encountered will be used
KErrXMLDuplicateRootElements -9009 Error code that indicates that more than one element has been encountered at the root of the document
KErrXMLMissingDocTypeTag -9010 Error code that indicates that no DOCTYPE tag was encountered
KErrXMLMissingVersionTag -9011 Error code that indicates that no XML version tag was encountered
KErrXMLDuplicateAttributeName -9012 Error code that indicates that an element has two or more entries for the same attribute
KErrXMLMultipleRootElements -9013 Error code that indicates there is no single root element
KErrXMLCorruptFile -9014 Error code that indicates spurious characters have been found. This may occur as the result of a missing or an extra attribute or element delimiter
KErrXMLIllegalCharacter -9015 Error code that indicates a built-in entity or element / attribute delimiter is at an inappropriate place
KErrXMLBadEntity -9016
KErrXMLInvalidElement -9017 Error code that indicates an element was found to be invalid by the DTD
KErrXMLInvalidAttribute -9018 Error code that indicates an attribute was found to be invalid by the DTD
MMS Server MTM
KMmsErrUnspecified -9100
KMmsErrServiceDenied -9101
KMmsErrMessageFormatCorrupt -9102
KMmsErrSendingAddressUnresolved -9103
KMmsErrMessageNotFound -9104
KMmsErrNetworkProblem -9105
KMmsErrContentNotAccepted -9106
KMmsErrUnsupportedMessage -9107
KMmsErrInvalidPDU -9108
KMmsErrNoData -9109
KMmsNoResponseStatus -9110
WAP Engine Errors
EWapErrGeneral -10000 "A general error has occurred"
EWapErrDocumentNotFound -10001 "The requested document cannot be found"
EWapErrDocumentCorrupted -10002 "This document is corrupt and cannot be read"
EWapErrAccessViolation -10003 "Access to this document has been denied"
EWapErrDataCallDropped -10004 "The data call has been closed"
EWapErrDataCallUnavailable -10005 "The data call is being used by another application"
EWapErrScriptNotFound -10006 "The requested script has not been found"
EWapErrScriptError -10007 "This script has returned a fatal error"
EWapErrScriptCorrupt -10008 "There is an error in this script"
EWapErrScriptIllegalAction -10009 "The script attempted an illegal action and has been terminated"
EWapErrScriptObscureLibraryCall -10010 "The script has attempted a function which is unavailable"
EWapErrAuthorizationFailed -10011 "Authorization has failed"
EWapErrProtocolNotSupported -10012 "The current network does not support the requested service"
EWapErrAccessPointNotSetUpGeneric -10013 "Access point information is missing"
EWapErrAccessPointNotSetUpForUSSD -10014 "Access point information is missing (USSD)"
EWapErrAccessPointNotSetUpForSMS -10015 "Access point information is missing (SMS)"
EWapErrAccessPointNotSetUpForCSD -10016 "Access point information is missing (CSD)"
EWapErrImageConversionFailed -10017 "Image conversion has failed"
EWapErrPluginNotFound -10018 "The requested plugin has not been found"
EWapErrCorruptUrl -10019 "Part of the URL contains invalid characters"
EWapErrCorruptScheme -10020 "Part of the scheme contains invalid characters"
EWapErrUnknownScheme -10021 "Unknown scheme"
EWapErrDTDUnavailable -10022 "Document cannot be validated as DTD is not available"
EWapErrInvalidDTD -10023 "DTD is invalid"
EWapErrUnknownDocument -10024 "The document requested cannot be found"
EWapErrMimeTypeMissing -10025 "MIME information is missing"
Crypto API
KErrBadPassphrase -11000
KErrTotalLossOfEntropy -11001
KErrKeyNotWeakEnough -11002
KErrInvalidPadding -11003
KErrWeakKey -11004
KErrNegativeExportNotSupported -11005
KErrKeyAlgorithm -11006
KErrKeyUsage -11007
KErrKeyValidity -11008
KErrKeySize -11009
KErrKeyAccess -11010
KErrPrivateKeyNotFound -11011
MMS Errors - possibly outdated?
KMmsGeneralError -11000
KMmsErrorNoWAPAccessPoint -11001
KMmsErrorUrisDontMatch -11002
KMmsErrorNoIAP1 -11003
KMmsErrorNoIAP2 -11004
KMmsErrorAP1Invalid -11005
KMmsErrorAP2Invalid -11006
KMmsErrorMessageTooBig -11007
KMmsErrorUnknownMessageType -11008
KMmsErrorDiskSpaceLow -11009
KMmsErrorStatusUnspecified -11010
KMmsErrorStatusServiceDenied -11011
KMmsErrorStatusMessageFormatCorrupt -11012
KMmsErrorStatusMessageAddressUnresolved -11013
KMmsErrorStatusMessageNotFound -11014
KMmsErrorStatusNetworkProblem -11015
KMmsErrorStatusContentNotAccepted -11016
KMmsErrorStatusUnsupportedMessage -11017
KMmsErrorHTTPConfiguration -11018
KMmsErrorHTTPNotFound -11019
KMmsErrorHTTPServerDown -11020
KMmsErrorWapStack -11021
KMmsErrorSessionAlreadyOpen -11022
KMmsErrorSessionNotOpen -11023
KMmsErrorBearerSuspended -11024
KMmsErrorTimeout -11025
KMmsErrorSuspendTimeout -11026
KMmsErrorUnknownRespFromGw -11027
KMmsErrorTransferCancelled -11028
KMmsErrorBufferEmpty -11029
KMmsErrorConnectionAlreadyActive -11030
KMmsErrorNoWapAp1 -11031
KMmsErrorNoURI1 -11032
KMmsErrorNoURI2 -11033
KMmsErrorNotHomeNetwork -11034
KMmsErrorInvalidSettings -11035
KMmsErrorEMRUExceeded -11036
Compression/Decompression - ZLib/GZip
KEZlibErrStream -11501
KEZlibErrData -11502
KEZlibErrBuf -11503
KEZlibErrVersion -11504
KEZlibErrUnexpected -11505
KEZlibErrDeflateTerminated -11506
KEZlibErrInflateTerminated -11507
KEZlibErrInflateDictionary -11508
KEZlibErrNotGZipFile -11509
KEZlibErrInvalidCompression -11510
KEZlibErrBadGZipHeader -11511
KEZlibErrBadGZipTrailer -11512
KEZlibErrBadGZipCrc -11513
Multimedia Framework
KErrMMNotEnoughBandwidth -12000 Not enough network bandwidth
KErrMMSocketServiceNotFound -12001 Error locating network socket services
KErrMMNetworkRead -12002 An error occurred while reading data from the network
KErrMMNetworkWrite -12003 An error occurred while writing data to the network
KErrMMServerSocket -12004 Invalid socket error or an error occurred while creating a network socket
KErrMMServerNotSupported -12005 Streaming Server not supported
KErrMMServerAlert -12006 Server alert
KErrMMUDPReceive -12007 Player cannot receive UDP data packets
KErrMMInvalidProtocol -12008 Network transport not recognized
KErrMMInvalidURL -12009 Invalid URL
KErrMMMulticast -12010 An error occured attempting to join or access multicast session
KErrMMProxyServer -12011 Proxy status error, Proxy invalid response error or invalid hostname for proxy
KErrMMProxyServerNotSupported -12012 Client cannot support proxy server
KErrMMProxyServerConnect -12013 Unable to locate proxy server or Proxy connection could not be established
KErrMMAudioDevice -12014 Cannot open audio device, or lost control of audio device
KErrMMVideoDevice -12015 Problem blitting video to display
KErrMMDecoder -12016 Invalid decoder, decoder not properly initialized, or appropriate decoder could not be found
KErrMMPartialPlayback -12017 Only able to play either the audio or the video portion of the media file. Could be due to a codec that isn’t supported, the video frame size being too large etc
KErrMMDRMNotAuthorized -12018 Digital Rights have expired

WML Errors (outdated?)
Parser
EWapErrWmlLibNullNode -12000
EWapErrWmlLibCDATANodeWithoutParent -12001

Validator
EWapErrWmlLibAccessViolation -12101
EWapErrWmlLibInvalidVariableReference -12102
EWapErrWmlLibInvalidConversionMethod -12103
EWapErrWmlLibIllegalVariableName -12104
EWapErrWmlLibIllegalTaskCountOnAnchor -12105
EWapErrWmlLibNULLVariableName -12106
EWapErrWmlLibNestedTables -12107
EWapErrWmlLibDuplicateDoNodeName -12108
EWapErrWmlLibUsageOfReservedWord -12109
EWapErrWmlLibZeroTableColumns -12110
EWapErrWmlLibNonWmlDocument -12111
EWapErrWmlLibMultipleMetaPropertyName -12112
EWapErrWmlLibEventBindingConflict -12114
EWapErrWmlLibMultipleAccessElements -12115
EWapErrWmlLibNonUniqueIds -12116
EWapErrWmlLibVariableInInvalidLocation -12117

XML Errors
Parser
EWapErrXmlLibMissingCDATASectionEndTag -13000
EWapErrXmlLibInvalidAttributeDeclaration -13001
EWapErrXmlLibEndTagMismatch -13002
EWapErrXmlLibInvalidCharacterReference -13003
EWapErrXmlLibUnknownEntityReference -13004
EWapErrXmlLibNoDTD -13005
EWapErrXmlLibMissingDocumentRootNode -13006
EWapErrXmlLibInvalidXmlVersionDefinition -13007
EWapErrXmlLibRootElementNameMismatch -13008

Validator
EWapErrXmlLibIllegalTagName -13100
EWapErrXmlLibIllegalFixedAttributeValue -13101
EWapErrXmlLibMissingRequiredAttribute -13102
EWapErrXmlLibMissingDocument -13104
EWapErrXmlLibInvalidDocumentStructure -13106
EWapErrXmlLibIllegalAttributeValue -13107

XmlLib
EWapErrXmlLibInvalidDocument -13200
EWapErrXmlLibDocumentBuffered -13201
EWapErrXmlLibDocumentAlreadyValid -13202
EWapErrXmlLibInvalidDTD -13203
ECOM Error Codes
KEComErrAlreadyReceiving -17001
KEComErrUnknownService -17002 The Client requested a service which is not supplied by this framework The Client requested a service which is not supplied by this framework
KEComErrInvalidUnloadPolicy -17003 The Client requested a service which is not supplied by this framework
KEComErrNoInterfaceIdentified -17004 The call to instantiate an Interface Implementation failed because no registrations exist for this interface
KEComErrEnableFailed -17005 The call to Enable the registered Interface Implementation failed
KEComErrDisableFailed -17006 The call to Disable the registered Interface Implementation failed
KEComErrNoRegistrationsFound -17007 The call to instantiate an Interface Implementation failed because no appropriate implementation was found
KEComErrInvalidIIC -17008 An attempt has been made to load an implementation contained within a dll which no longer exists (deleted or is on a CF card that has been removed)
KEComErrUninstallFailed -17009 The call to Remove the registered Interface Implementation failed
KEComErrReinstallFailed -17010 The call to Re-register an Interface Implementation failed
KEComErrRegistrationFailed -17011 The call to Register an Interface Implementation failed
KEComErrNotConnected -17012 The client does not have a session open with theframework
KEComErrReferenceCountInvalid -17013 The Interface Implementation reference count is invalid
KEComErrNoResolver -17014 The Non-Default resolver could not be instantiated. The most likely situation is that an incorrect implementation uid was supplied
KEComErrSuspendFailed -17015 The call to Suspend registration activities failed
KEComErrResumeFailed -17016 The call to Resume registration activities failed
KEComErrDestructionFailed -17017 The Interface Implementations destruction could not be recorded
KEComErrDriveAlreadyInstalled -17018 An attempt has been made to add a drive to the registry which already exists
KEComErrDriveNotFound -17019 An attempt has been made to update registry information for a dll on a drive that does not exist
KEComErrIndexEntryNotFound -17020
KEComErrNoRegistrationData -17021 An IIC has been found which does not have a corresponding registration information file
KEComErrInvalidRegistryData -17022 An attempt has been made to update the registry information for a non-existent DLL. An ECom internal error
KEComErrMismatchedTags -17023
KEComErrInstantiationPointerNotFound -17024
KEComErrInstantiationPointerNotAvailable -17025
KEComErrTooManyNotificationsOutstanding -17026 The client has requested too many notifications. ECom can only support a finite number of notifications
KEComErrDestroyingWithNullDtorKey -17027 The client called DestroyedImplementation with a destruction key of NULL. This is an irrecoverable error because the object cannot be deleted
KEComErrMissingParameter -17028 An ECom service was requested with an essential parameter missing. For example, this error code will be supplied when calling an overload of CreateImplementationL which uses a non-default resolver if you fail tosupply the resolver
KEComErrListInvalidAwaitNotification -17029 The registry index is invalid but the client has requested notifications - so they will receive a notification when the indexis ready again
KEComErrListCurrentlyUnavailable -17030 The registry index is invalid and the client has not requested notifications. They will have to try again later after discoveries have completed
HTTP Errors
EHttpGeneralError -20000 "A general error has occurred"
EHttpCannotFindServer -20001 "The URL specified a non-existent or inaccessible server"
EHttpCannotFindPlugin -20002 "The plugin name/type was not found on the device"
EHttpUnsupportedMethod -20003 "The method requested is not supported"
EHttpWapAPReadFailure -20004 "Access point information is missing"
EHttpNetDialSetupFailed -20005 "Net dial setup has failed"
EHttpWtlsConfigFailed -20006 "The WAP stack has been configured incorrectly for WTLS"
EHttpWtlsBadServerCert -20007 "The WAP stack has rejected the gateway certificate"
EHttpWtlsServerCertRejected -20008 "The security certificate has been rejected and the session will be aborted"
EHttpWtlsCipherRejected -20009 "The session has been aborted due to low security status"
EHttpGatewayCannotBeReached -20010 "A session could not be established with the WAP Gateway"
EHttpGatewayTransactionAbort -20011 "A transaction was aborted by the gateway or the stack"
EHttpGatewaySessionDisconnect -20012 "The session was disconnectedby the WAP Gateway"
EHttpCancellationAbort -20013 "Error code for leave when cancellation has occured during RunL()"
EHttpReceivingErrorDeck -20014 "Could not find document, so receiving an error deck"
HTTP Status Code 400 -20400 "The request sent does not use the correct syntax"
HTTP Status Code 401 -20401 "Unauthorized request, authentication must be used"
HTTP Status Code 402 -20402 "Payment is required for this action to succeed"
HTTP Status Code 403 -20403 "The document requested cannot be disclosed by the server"
HTTP Status Code 404 -20404 "The document requested cannot be found on the server"
HTTP Status Code 405 -20405 "The methodrequested is not currentlyallowed"
HTTP Status Code 406 -20406 "The header information of the returned resource is incorrect"
HTTP Status Code 407 -20407 "Proxy authentication is required"
HTTP Status Code 408 -20408 "The request has timed out"
HTTPStatus Code 409 -20409 "A Conflict has occurred"
HTTP Status Code 410 -20410 "The document requested cannot be found on the server"
HTTP Status Code 411 -20411 "Length is required here"
HTTP Status Code 412 -20412 "A precondition has not been met"
HTTP Status Code 413 -20413 "The request entity is too large"
HTTP Status Code 414 -20414 "The URL requested is too long"
HTTP Status Code 415 -20415 "The media type requested is unsupported"
HTTP Status Code 500 -20500 "An internal server error has occurred"
HTTP Status Code 501 -20501 "An internal server error has occurred"
HTTP Status Code 502 -20502 "An error has occurred within the WAP gateway"
HTTP Status Code 503 -20503 "The service requested is unavailable"
HTTP Status Code 504 -20504 "The connection to the gateway has timed out"
HTTP Status Code 505 -20505 "This HTTP version is not supported"

Coming up
========
* I will Post any more Error Codes you find.

Do write comments about this post or write to me at [skumar.brewdev@yahoo.com]

Thanks.
Sunil Kumar